1. Product Documentation This document is a configuration guide for OpenOTP Radius Bridge (RB). The reader should notice that this document is not a guide for installing and configuring OpenOTP or WebADM. Specific application guides are available through the RCDevs documentation website. 2. Product Overview OpenOTP Radius Bridge provides the RADIUS RFC-2865 (Remote Authentication Dial-in User Service) API for OpenOTP Authentication Server. Standalone, the OpenOTP server provides SOAP/XML and JSON interfaces over HTTP and HTTPS.

1. WebADM/OpenOTP/Radius Bridge For this recipe, you will need to have WebADM/OpenOTP installed and configured. Please, refer to WebADM Installation Guide and WebADM Manual to do it. You have also to install our Radius Bridge product on your WebADM server(s). Another documentation on that setup is provided by Cisco at this link 2. Register your ASA SSL VPN in Radius Bridge On your OpenOTP RadiusBridge server, edit the /opt/radiusd/conf/clients.conf and add a RADIUS client (with IP address and RADIUS secret) for your ASA SSL VPN server.

1. WebADM/OpenOTP/Radius Bridge For this recipe, you will need to have WebADM/OpenOTP installed and configured. Please, refer to WebADM Installation Guide and WebADM Manual to do it. You have also to install our Radius Bridge product on your WebADM server(s). 2. Register your F5 VPN in RadiusBridge On your OpenOTP RadiusBridge server, edit the /opt/radiusd/conf/clients.conf and add a RADIUS client (with IP address and RADIUS secret) for your F5 VPN server.

How To Enable OpenOTP Authentication On Juniper-Pulse Secure This document explains how to enable OpenOTP authentication with Radius Bridge and Juniper SSL VPN. 1. WebADM/OpenOTP/Radius Bridge For this recipe, you will need to have WebADM/OpenOTP installed and configured. Please, refer to WebADM Installation Guide and WebADM Manual to do it. You have also to install our Radius Bridge product on your WebADM server(s). 2. Register Your Juniper VPN In RadiusBridge On your OpenOTP RadiusBridge server, edit the /opt/radiusd/conf/clients.

How To Enable OpenOTP Authentication in Palo Alto SSL VPN This document explains how to enable OpenOTP authentication in Palo Alto SSL VPN. 1. Register your Palo Alto VPN in RadiusBridge On your OpenOTP RadiusBridge server, edit the /opt/radiusd/conf/clients.conf and add a RADIUS client (with IP address and RADIUS secret) for your Palo Alto VPN server. Example: client <VPN Server IP> { secret = testing123 shortname = PaloAlto-VPN } 2. On Palo Alto Admin Interface, Set up a RADIUS Server Profile Enter the Palo Alto administration interface.

1. Overview For this recipe, you will need to have WebADM/OpenOTP installed and configured. Please, refer to WebADM Installation Guide and WebADM Manual to do it. 2. NetIQ Installation and Initial Configuration We used the NetIQ appliance version 4.3 downloaded from the Microfocus website (trial version). ISO file name: AM_43_AccessManagerAppliance_Eval-0831.iso It’s SUSE Linux: netiqam:~ # cat /etc/SuSE-release SUSE Linux Enterprise Server 11 (x86_64) VERSION = 11 PATCHLEVEL = 4 NetIQ Access Manager Appliance 4.

1. Overview This document explains how to enable OpenOTP authentication with Radius Bridge and pfSense. For this recipe, you will need to have WebADM, OpenOTP installed and configured. Please, refer to WebADM Installation Guide and WebADM Administration Guide to do it. 2. WebADM/OpenOTP/Radius Bridge For this recipe, you will need to have WebADM/OpenOTP installed and configured. Please, refer to WebADM Installation Guide and WebADM Manual to do it. You have also to install our Radius Bridge product on your WebADM server(s).

1. Overview In this documentation, we will demonstrate how to integrate OpenOTP with Swift Alliance Access 7.2 (AA). LDAP and Radius protocols can be used to integrate AA with OpenOTP. Here, we will demonstrate the Radius integration. This guide has been written with the help of the official Swift Alliance Access 7.2 Administrator Guide. So here, we will use RADIUS one-time passwords authentication method and not the embedded two-factor authentication module implemented in AA.

1. Overview This document explains how to enable OpenOTP authentication with Radius Bridge and OpenVPN. The advantage of integrating RadiusBridge with OpenVPN is : Secure access with MFA. Authentication of Ldap users via OpenVPN client. 2. WebADM/OpenOTP/Radius Bridge For this recipe, you will need to have WebADM/OpenOTP installed and configured. Please, refer to WebADM Installation Guide and WebADM Manual to do it. You have also to install our Radius Bridge product on your WebADM server(s).

1. Overview This documentation provides comprehensive guidance on integrating RCDevs solutions with Extensible Authentication Protocol (EAP) methods for secure and efficient user and computer authentication. 802.1X is a specific IEEE standard that deals with network access control and authentication. It is used to ensure that only authorized devices and users can access a network. Here are the key points about 802.1X: Authentication: 802.1X provides a framework for authenticating devices or users before they are granted access to a network.

1. Overview In that documentation, we will explain how to configure OpenOTP multi-factor authentication on your Microsoft Network Policy Server. As a practical example, we will configure NPS with Microsoft Remote Access Server for VPN use. For this recipe, you will need to have a WebADM, OpenOTP and Radius Bridge installed and configured. Please refer to WebADM Installation Guide, WebADM Manual and Radius Bridge Manual for instructions on these. Your Microsoft Network Policy Server and Remote Access Server should be installed and configured for VPN (PPTP, SSTP) use.

1. Overview In that documentation, we will explain how to return Radius Attributes to a Radius client in order to provide extra information after a successfull authentication. For this recipe, you will need to have a WebADM, OpenOTP and Radius Bridge installed and configured. Please refer to WebADM Installation Guide, WebADM Manual and Radius Bridge Manual for instructions on these. 2. Send an LDAP Value We select the user in WebADM and we click on WebADM settings: None [CONFIGURE]: