Documents in Radius

Policies

1. Overview This documentation will explain policies configurable for Web Services and Web Applications under WebADM admin GUI. WebADM provides different kinds of policies : default application configuration (weight 1), per-group (weight 2), per-user (weight 3), per-application (weight 4-6). Settings with the highest weight override settings with the lowest weight. (e.g for OpenOTP: My default OpenOTP settings require a LoginMode=LDAP only but the user who is trying to log in has a policy configured on his account with the LoginMode=LDAP+OTP.

Radius Bridge Server

1. Product Documentation This document is a configuration guide for OpenOTP Radius Bridge (RB). The reader should notice that this document is not a guide for installing and configuring OpenOTP or WebADM. Specific application guides are available through the RCDevs documentation website. 2. Product Overview OpenOTP Radius Bridge provides the RADIUS RFC-2865 (Remote Authentication Dial-in User Service) API for OpenOTP Authentication Server. Standalone, the OpenOTP server provides SOAP/XML and JSON interfaces over HTTP and HTTPS.

Cisco ASA

1. WebADM/OpenOTP/Radius Bridge For this recipe, you will need to have WebADM/OpenOTP installed and configured. Please, refer to WebADM Installation Guide and WebADM Manual to do it. You have also to install our Radius Bridge product on your WebADM server(s). Another documentation on that setup is provided by Cisco at this link 2. Register your ASA SSL VPN in Radius Bridge On your OpenOTP RadiusBridge server, edit the /opt/radiusd/conf/clients.conf and add a RADIUS client (with IP address and RADIUS secret) for your ASA SSL VPN server.

F5 BIG-IP APM

1. WebADM/OpenOTP/Radius Bridge For this recipe, you will need to have WebADM/OpenOTP installed and configured. Please, refer to WebADM Installation Guide and WebADM Manual to do it. You have also to install our Radius Bridge product on your WebADM server(s). 2. Register your F5 VPN in RadiusBridge On your OpenOTP RadiusBridge server, edit the /opt/radiusd/conf/clients.conf and add a RADIUS client (with IP address and RADIUS secret) for your F5 VPN server.

Juniper-Pulse

How To Enable OpenOTP Authentication On Juniper-Pulse Secure This document explains how to enable OpenOTP authentication with Radius Bridge and Juniper SSL VPN. 1. WebADM/OpenOTP/Radius Bridge For this recipe, you will need to have WebADM/OpenOTP installed and configured. Please, refer to WebADM Installation Guide and WebADM Manual to do it. You have also to install our Radius Bridge product on your WebADM server(s). 2. Register Your Juniper VPN In RadiusBridge On your OpenOTP RadiusBridge server, edit the /opt/radiusd/conf/clients.

Swift Alliance Access

1. Overview In this documentation, we will demonstrate how to integrate OpenOTP with Swift Alliance Access 7.2 (AA). LDAP and Radius protocols can be used to integrate AA with OpenOTP. Here, we will demonstrate the Radius integration. This guide has been written with the help of the official Swift Alliance Access 7.2 Administrator Guide. So here, we will use RADIUS one-time passwords authentication method and not the embedded two-factor authentication module implemented in AA.

OpenVPN

1. Overview This document explains how to enable OpenOTP authentication with Radius Bridge and OpenVPN. The advantage of integrating RadiusBridge with OpenVPN is : Secure access with MFA. Authentication of Ldap users via OpenVPN client. 2. WebADM/OpenOTP/Radius Bridge For this recipe, you will need to have WebADM/OpenOTP installed and configured. Please, refer to WebADM Installation Guide and WebADM Manual to do it. You have also to install our Radius Bridge product on your WebADM server(s).

EAP and Certificate based authentications

1. Overview This guide explains how to deploy certificate-based authentications for users and computers using 802.1x with RCDevs solutions. This solution can be applied to Wireless LAN / Wired LAN networks, RCDevs Web applications and also custom integrations like certificate-based authentication on your own website through OpenOTP APIs. It also describes how to implement EAP-TTLS authentication and certificate based authentication through OpenOTP APIs. All integrations require at least WebADM product installed and running.

Radius Returned Attributes

1. Overview In that documentation, we will explain how to returned Radius Attributes to a Radius client in order to provide extra information after a successfull authentication. For this recipe, you will need to have a WebADM, OpenOTP and Radius Bridge installed and configured. Please refer to WebADM Installation Guide, WebADM Manual and Radius Bridge Manual for instructions on these. 2. Send an LDAP Value We select the user in WebADM and we click on WebADM settings: None [CONFIGURE]: